Causes of Indicator Lights Not Functioning - In automatic motors, the neutral indicator lights are no longer functioning because neutral lights are a sign that the gear is in a state of 0 aka neutral. So, don't panic if the neutral indicator light doesn't turn on if your motorbike is an automatic motorbike. Because automatic does not use gear gears.
In addition to automatic motors, when the ignition is turned to the ON position. Then the neutral indicator light will turn on, with the gear gear in position 0 or free.
Neutral indicator lights usually coexist with indicator lights that show numbers 1 - 4. Although on some motors, indicator lights 1-4 are not used and are replaced with TOP GEAR indicator lights, which indicate if the gear is geared in gear position 4.
The function of the neutral indicator light that shows the gear gear in the free position is very helpful for the driver. Especially when the vehicle stops.
Well, if your motorbike's neutral indicator light doesn't work it will certainly be very annoying when driving. To find out the cause, read the following article.
Cause and Solution Neutral Indicator Light Does Not Turn On
the neutral indicator light does not turn on
1. The indicator light is broken / burnt
The first cause of a neutral indicator light does not work usually because the lamp / bulb is broken and burnt. Check the bulb section, it is located behind a neutral indicator light. If it burns or breaks, replace the new one immediately.
2. The fuse breaks
the neutral indicator light on the motorcycle does not turn on
A neutral indicator light is a lamp that relies on electric current from the battery. If when the ignition is ON, the neutral indicator light does not turn on normally because the fuse is broken.
You can check by way of starting the motor using the kick starter, if the indicator light is on when the engine is on, there is a current from the battery that is 'not up' on the indicator light.
You can check by way of starting the motor using the kick starter, if the indicator light is on when the engine is on, there is a current from the battery that is 'not up' on the indicator light.
Turns on the indicator lights when the engine is on because it gets electricity from the spool / engine. The solution is to replace the fuse if the fuse breaks.
As already explained in the second case, if the neutral indicator light is the main electric current from the battery. If the battery is overdrawn, you can be sure the indicator lights will not turn on. The solution is to replace the battery with a new one.
4. Neutral switch is damaged
neutral switch
This component is usually located at the top of the front gear. Neutral switches are in charge of reading the position of the bottle gear contained in the crankcase by connecting the end of the starter switch to the gear bottle. Because of the friction that occurs periodically, eating normally the brass found on the neutral switch has run out. This is what causes the neutral indicator light to not work.
5. It turns out your motorbike is automatic
If your motorbike is automatic, then you don't panic and be confused to find a neutral indicator light. Because automatic motors don't have gear gears. Don't panic ... hehehehehe.
Usually this is accompanied by other indicator lights such as indicator lights 1-4 or TOP GEAR indicator lights.
You can replace the neutral switch with a new one.
Thus is the cause of the neutral indicator light does not turn on. Hopefully it is useful and provides a little insight
EmoticonEmoticon